JOHN DEERE COMBINE SETTINGS AND THEIR SIGNIFICANCE

 JOHN DEERE COMBINE SETTINGS AND THEIR SIGNIFICANCE

Agriculture is the most significant part of the nation’s economy. In other words, it is the backbone of the country’s well being. For a large number of people, agriculture is their livelihood and the main source of income. Only this sector can ensure every human gets his share of food and doesn’t starve. In other words, it is a blessed occupation, and farmers are like gods. So, it is our duty to protect them and make their work easy and productive. With this in mind, John Deere has designed machines and products to help farmers since 1837. The John Deere Combine provides farmers with the latest technology, which allows farmers to harvest their crops easy and hassle-free.

john deereThe company released the first John Deere Combine No.2 in 1927. In 1928, they released the next model, the Combine No.1. Seeing that the farmers find it difficult to reap crops from the hillside, they combine with Hillside Technology in the 1930s. This could help farmers reap their hillside crops and grains. After some 40 years, the new generation combines such as the 3300, 4400, 6600, and 7700. Later, Single-Tine Separation combines came into the market, which created a new revolution among the then combined technology. Till now, they have produced lakhs of combines to assist farmers.

In short, combines has changed the face of the whole farming process. But it is important to ensure that you use the correct John Deere Combine settings for a better result. Some of the things you should take care of with respect to the adjustments of the combine are as follows:

  • One of the most significant factors you should take care of is ground speed. This speed is adjustable by the operator. Set the ground speed according to the intuition of the operator and also based on the type of crop.
  • Make sure that the weight distribution should be equal and uneven throughout the whole width of the sieve. Thus, the fed material should be divided equally between the sieve and the rotor. Consequently, there will be an efficient separation of the grains.
  • Sometimes, the combine will not take in the crop smoothly or swiftly. This indicates that the feed accelerator roller is operating very fastly, and you need to slow it down. The feed accelerator roller is located above the feed house.
  • Also, grain losses can take place from the combine rotor. This is also due to poor rotor settings. Adjust the rotor speed to a level that can prevent further losses. The grain loss monitor can monitor this through a trial and error method.
  • Again, if you face problems, then you should look at the combine. Problems in the adjustment of the combine sieves can be detrimental. Set the sieve in a more open position and elevate the fan speed. Do check the produced grains. If the grains show some un-threshed heads, you have two options: either fit some blanking bands as extra additions or close the concave a bit. Both can resolve your issue.
  • Set the speed of the head auger, always under 200 rpm. This is a must-to-follow John Deere Combine setting. 
  • A stripping rotor is a part of the stripper header that removes grain from the crop. So, the speed of the stripping rotor should be maintained low. This allows for the crop to separate precisely from the grain without any loss here.
  • The John Deere Combine settings recommend the concave clearance to be equal to that of the cob to prevent breakage of grains. Adjusting the concave clearance should be done in a stepwise manner. Set the widest space setting and then slowly reduce the space until it is safe for the grains. This is because extreme settings can be detrimental. The widest setting cannot separate the grain from cobs and thus ends up being of no use. Less/no space between them can lead to broken grains and cobs.
  • Cleaning shoe adjustments make the cleaning process more efficient. The cleaning fan provides air that separates the grain that flies off from the pan. So, only the first waves of air can separate more grains. So, a considerable and even amount of grain should go off the pan into the chaffer sieve. Grain losses at this place can be prevented by opening the chaffer wide and allowing a large amount of grain inside. This is said to reduce overburden on the lower sieve. Also, ensure appropriate airflow in the cleaning shoe area.

john deere

Maintenance of the Combine

John Deere Combine Settings also recommend regular monitoring and maintenance of crops. Check your combine for its smooth performance throughout the day. It is because moisture levels can change from morning to afternoon and at the end of the day. A good way to do this is to pause the work in your field. Make the combine work by feeding the crop. Monitor every action and movement precisely, taking care of every aspect. Before adjusting, always be aware of why you are doing this.

Advantages of John Deere Combine Setting

  • Can help in smooth performances of the machine
  • Prevent grain losses
  • Achieve maximum profit
  • Specific for different crops
  • Reap high-quality grains
  • Makes work easier and quite efficient
  • Removes waste materials from grains
  • Give 100% pure yield

 It is to be noted that the combine settings differ from each crop like soybean, corn, oats, etc. For example, in the case of a canola, the cylinder and cleaning sieve are to be adjusted at the largest settings, while concave and pre-cleaner are set at the lowest settings. In the case of John Deere Combine settings for soybean, the main factor required is adequate airflow.

Thus, John Deere Combine settings are the perfect solution for a farmer’s agony about his work. Regular maintenance of the combines along with a concordant following of the settings can do magic to your crops. Just refer to the user manual or follow the instructions as specified above and thus reap gold from fields.

Related post